DT812PV-235-N2 – 235kHz – Plastic Thru Hull Smart Sensor – 12° Tilt – NMEA 2000 – 6M CableAirmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183 m (600′), as well as accurate shallow-water readings in as little as 500 mm (1.6′). Available in fixed 0°, 12°, or 20° tilt, the DT800 is perfect for power and sailboat applications. It is sold with a choice of rugged housings— plastic, bronze, or stainless steel—to accommodate any vessel type or hull material. These low-profile housings do not affect hull performance and will provide accurate readings at high speeds.Airmar’s Smart™ Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible device or display. Because the ceramic is tilted inside the housing, the transducer beam is oriented straight down, resulting in strong bottom echo returns and accurate depth readings. The retractable housing with a self-closing valve reduces water flow into the vessel when the transducer is removed for cleaning.Smart™ Sensor Features
Broadband ceramic available with 0°, 12° and 20° tilt options
Enhanced depth performance
Maximum Depth Range: 180M (594’)
Minimum range 0.5M (1.6’)
Urethane face provides better sensitivity
Excellent high-speed performance
Fixed 12° tilt for 8° to 15° deadrise
NMEA 2000 output
100 W RMS power
Frequency: 235 kHz
Cone: 12°
All models have depth and temperature
235 kHz eliminates interference with fishfinders
Retractable insert provides ease of serviceability
Usable Shaft Length: 57mm (2.25”)
6M(19.8”) NMEA 2000® devicenet cable and connector
51mm (2”) housing
Blanking plug included
Accommodates maximum hull thicknesses 54 mm (2 1/8”)
Accommodates minimum hull thicknesses 6.3 mm (0.25”)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Transducers
Airmar DT812PV-235-N2 – 235kHz – Plastic Thru Hull Smart Sensor – 12 Tilt – NMEA 2000 – 6M Cable [DT812PV-235-N2]
$399.00
![airmar dt812pv 235 n2 235khz plastic thru hull smart sensor 12 tilt nmea 2000 6m cable [dt812pv 235 n2]](https://bestfishfindersonline.com/wp-content/uploads/2026/01/airmar-dt812pv-235-n2-235khz-plastic-thru-hull-smart-sensor-12-tilt-.jpg)
![navico xsonic bronze 20 hdi transducer thru hull 9 pin connector 10m cable [000 13907 001]](https://bestfishfindersonline.com/wp-content/uploads/2026/01/navico-xsonic-bronze-20-hdi-transducer-thru-hull-9-pin-connector-10m-cable-300x300.jpg)
![maretron dst110 depth/speed/temperature triducer [dst110 01]](https://bestfishfindersonline.com/wp-content/uploads/2026/01/maretron-dst110-depth-speed-temperature-triducer-dst110-01-300x300.jpg)
![airmar b75m bronze chirp thru hull 0 tilt 600w requires mix and match cable [b75c 0 m mm]](https://bestfishfindersonline.com/wp-content/uploads/2026/01/airmar-b75m-bronze-chirp-thru-hull-0-tilt-600w-requires-mix-and-match-300x300.jpg)
![airmar dst810 smart multisensor 23khz bronze nmea 2000 transducer n2k [dst810 bv n2]](https://bestfishfindersonline.com/wp-content/uploads/2026/01/airmar-dst810-smart-multisensor-23khz-bronze-nmea-2000-transducer-n2k-300x300.jpg)
Reviews
There are no reviews yet.